The Formal Shirt Guide · Fit, Cut & Silhouette

Fit is the difference between wearing a shirt and owning it.

Colour and fabric catch the eye first, but fit determines whether a shirt looks polished. The same shirt in two different fits can make the same man look sharp or careless. These are the principles to look for.

Full-length studio photograph of a man in a rose-pink long-sleeve shirt with sleeves slightly rolled, worn untucked over straight jeans
RelaxedWorn untucked, an easy line through the body
Full-length studio photograph of a man in a black long-sleeve shirt worn untucked with jeans and black shoes
DefinedClean shoulder line, sleeves to the wrist
Full-length studio photograph of a man walking in a stone-coloured shirt with rolled sleeves and light jeans
In motionRoom through the back to move freely

The four common fits

Slim, regular, classic, contemporary.

Fit names are not standardised: one maker’s “slim” can be another’s “regular”. Use these descriptions as a general guide, and always judge a shirt by how it sits on your own body.

Slim fit

Cut close through the chest and noticeably tapered at the waist, usually with narrower sleeves. Creates a sharp, modern outline on slimmer builds, but should never pull across the buttons.

Regular fit

A balanced cut with some shaping at the waist and comfortable room through the chest. Suits most builds and most occasions, and is the safest starting point.

Classic fit

Generous through the body, with a straight fall from chest to hem and fuller sleeves. Prioritises comfort and freedom of movement; ideal for broader builds and long days.

Contemporary fit

A modern middle ground, trimmer than regular but less tapered than slim, often with a slightly shorter body that can also be worn untucked with smart-casual outfits.

Practical guidance · Ten checkpoints

How to tell, in the mirror, that a shirt fits.

Diagram of a formal shirt marking seven fit checkpoints: collar, shoulder seam, chest, sleeve length and cuff, waist, shirt length and armhole 1 2 3 4 5 6 7
Numbers correspond to the checkpoints described alongside.
  1. 1

    Collar fit

    Buttoned, the collar should allow roughly one or two fingers between neck and cloth. Tighter will be uncomfortable; looser will look sloppy under a tie.

  2. 2

    Shoulder alignment

    The shoulder seam should sit at the edge of your shoulder bone, not hanging down the arm and not pulled up onto the neck. This single point anchors the whole shirt.

  3. 3

    Chest

    Buttons should lie flat with no pulling or X-shaped creases. You should be able to cross your arms without strain, with no excess cloth billowing either side.

  4. 4

    Sleeve length & cuff position

    With arms relaxed, the cuff should reach the base of the thumb and sit at the wrist bone. Under a jacket, around a centimetre of cuff showing is a traditional, polished proportion.

  5. 5

    Waist shaping

    Some taper prevents cloth gathering above the belt. Too much taper pulls when seated. When tucked in, the shirt should look smooth, not ballooned.

  6. 6

    Shirt length

    A shirt intended to be tucked should be long enough to stay tucked when you raise your arms. Shirts worn untucked should generally end around mid-zip of the trousers.

  7. 7

    Comfort & movement

    Reach forward and lift your arms. A well-fitting shirt allows this without the body pulling out of the trousers or the collar riding up. Higher armholes often help.

  8. 8

    Trouser compatibility

    Slim shirts pair naturally with tapered trousers; fuller shirts with straighter cuts. Keeping shirt and trouser volumes in proportion creates a continuous, balanced line.

  9. 9

    Body proportions

    Vertical stripes and darker tones can visually lengthen; lighter colours and horizontal emphasis broaden. Use fit and pattern together to balance your natural proportions.

  10. 10

    The sitting test

    Sit down. If the buttons gape or the collar tightens, the shirt may be too slim for daily wear. A shirt has to look good across a whole day, not just when you are standing.

Reading a shirt on the hanger

What the hanger tells you.

Before you try a shirt on, the hanger reveals a lot. Look at the slope and width of the shoulders, how sharply the sides curve in towards the waist, and the length and curve of the tail.

Bright green long-sleeve shirt on a wooden hanger, showing a straight body and full-length sleeves
Straight bodyPl. 04
Mid-blue long-sleeve shirt on a wooden hanger, showing shoulder width and a curved hem
Curved hemPl. 05
Green and white striped long-sleeve shirt on a wooden hanger
Stripe & shoulder linePl. 06

Before you decide

A thirty-second mirror check.

Sizes vary between makers, so always try a shirt on. When you visit Options Mall, you can compare sizes and cuts in person.

  1. Button the collar: one or two fingers of room.
  2. Check the shoulder seam sits on the shoulder edge.
  3. Look for flat buttons and no pulling across the chest.
  4. Let your arms hang: the cuff reaches the thumb base.
  5. Raise your arms: the shirt stays tucked.
  6. Sit down: no gaping, no tightness at the collar.